P3d 4.1 Download

Pete & John Dowson's Software

» edgley optica p3d v4 » edgley optica work p3d v4 » aerosoft egll p3d v4 jetways » descargar airbus a320 p3d v4 » active sky next p3d v4 torrent » l39 trainer for p3d v4 » active sky 2016 p3d v4 torrent » p3d v4 p180 » qm for windows v4 and qm for excel v4 » sinumerik operate v4.5 v4.5 ed.2. In Prepar3D v4, this makes use of the add-on package system. If you re-install your simulator, you won't need to re-install your Orbx products again. We'll take care of everything. The download and installation process in Central has been optimised more than ever before. You'll see speeds up to 4x faster than in FTX Central 3. P3d v3.4 download free pc. Most people looking for P3d v3.4 free pc downloaded: Prepar3D. 3.9 on 110 votes. Prepar3D is a visual simulation platform that allows users to create training scenarios across aviation, maritime and ground domains. Boeing E-7 Japan ASDF FSX & P3D. Preparation: Download P3D4 and MD5 Check sum Go to this link. (Will only work when P3D is ordered!)First of all check that the license you bought are on your account page.Step 1: download the instruction pdf and by all means: read them before you go!Step 2: decide what you have to download: a. It is recommended to.

General data-reduction tool for fiber-fed integral-field spectrographs.


This is a consolidated list of flight sim related software produced by Pete and John Dowson, with links for downloading and purchasing, where relevant.
Please use Peter Dowson's Support Forumfor all support questions. And please make good use of the Sub-Forums there, which contain much useful information and further resources.

The software available through the links on this site are, for the most part, the current official release. For interim updates refer to the Forum's Download Links subforum.

P3d v4.5 download

Main products for FSX, FSX-SE, MSFS and all Prepar3D Versions releases to date

[64-bit]

Release 7.0.2 of FSUIPC7 (incorporating the Server for WideFS 7), for use with MSFS

Although WideServer7 is built into FSUIPC7, you still need the WideClient from the WideFS link below. The WideServer component is enabled by a separate Registration code, which must be purchased from SimMarket (see below).

Note: if you have purchased WideFS to work with FSUIPC4, FSUIPC5 or FSUIPC6, there is no need to re-purchase. Your existing registration details will still be applicable.

November 28th 2020.

[64-bit]

Full release of FSUIPC 6 (incorporating the Server for WideFS 7), for use with Prepar3D 64-bit Versions 4 and 5

Although WideServer7 is built into FSUIPC6, you still need the WideClient from the WideFS link below. The WideServer component is enabled by a separate Registration code, which must be purchased from SimMarket (see below).

Note: if you have purchased WideFS to work with FSUIPC4 or FSUIPC5, there is no need to re-purchase. Your existing registration details will still be applicable.

November 28th 2020.

[64-bit]

Full release of FSUIPC 5 (incorporating the Server for WideFS 7), for use with Prepar3D 64-bit Version 4

Although WideServer7 is built into FSUIPC5, you still need the WideClient from the WideFS link below. The WideServer component is enabled by a separate Registration code, which must be purchased from SimMarket (see below).

If you have purchased WideFS to work with FSUIPC4 there is no need to re-purchase. Your existing registration details will still be applicable.

Note: This product has now been superceeded by FSUIPC6 (above). It is recommended to use FSUIPC6 where possible, although please note that registration keys for FSUIPC5 are NOT VALID for FSUIPC6.

June 28th 2020.

FSUIPC 4.975 [for FSX, FSX-SE and P3D 1.4-3.4]

[32-bit]

Full release of FSUIPC 4 (incorporating the Server for WideFS 7), for use with FSX, FSX-SE and Prepar3D 1.4-3.4
This version supports the FSX-SE Beta build 63003, but with restricted operation. Please see the IMPORTANT notes for FSX-SE users included in the ZIP.
FSUIPC4 is not supported on any version of Windows before Windows 7, and will probably not work on such versions in any case.
Although WideServer7 is built into FSUIPC4, you will still need the WideClient from the link below. The WideServer component is enabled by a separate Registration code, which must be purchased from SimMarket (see below).
Please Note: This version works with versions 1.4-3.4 of Prepar3D, but they will not be supported in the future. Prepar3D users should move on to Version 4.

May 11th 2020.

WideFS7

Full package for WideFS7, which includes WideClient 7.156, WideCloser 1.0.2 and documentation.
WideClient Links FS utilities over a LAN, without needing to have a copy of FS on the second computer.
Note that WideFS consists of WideClient, WideServer and WideCloser. However, as WideServer is now included in FSUIPC since version FSUIPC4, it is only needed for FS2004.
FSUIPC is required. January 31st 2019.

To buy FSUIPC or WideFS for FSX, FSX-SE, MSFS or Prepar3D, and receive your Registration code, use the relevant link below to go to the simMarketpurchase page:

FSUIPC7 for MSFS

FSUIPC6 for P3D v4 & v5

FSUIPC4 for FSX and P3Dv3

WideFS7 for FSX, P3D and MSFS

Additional Free Software

MakeRwys 5.11MakeRwys is a simple utility which extracts selected airport data from active scenery, basing its scan on the active SCENERY.CFG file. It produces data files for all versions of Radar Contact, for FStarRC, and for several other programs. Version 5.10 is suitable for FS2002, FS2004, FSX, P3D and MSFS running on Windows 10.

Documentation of the data files produced is included in the ReadMe, inside the ZIP. The program is free for anyone to use as necessary to support their own data needs, as well as users of the mentioned programs.
IMPORTANT: For FS2002, FS2004 and FSX running on earlier versions of Windows than Win10 you will need version 4.70 instead: MakeRunways_470.zip
December 2nd 2020

FSUIPC SDK

FSUIPC Software Development Kit for versions 3.999/4.80, authored by Peter Dowson, Pelle Liljendal and Chris Brett. Contiains very large list of FS offsets as well as source code examples for C/C++, Delphi and VB.Also contains FSInterrogate. (for FS2004, Prepar3D, FSX and FSX-SE).
February 10th 2012.

vJoyOffsets

A utility program for linking FSUIPC Offset values to virtual joystick inputs. Requires the vJoy package provided by Shaul Eizikovitch. Authored by Peter Dowson, December 2019.

PFC DLLincludes
PFC.DLL forFSX/P3D1-3, and
PFCcom64.DLL for P3D4, P3D5 and MSFS (FS2020)

PFC.DLL This program is an FS2000/FS2002/FS2004/FSX/P3D driver for the COM-port connected equipment produced by PFC (Precision Flight Controls Inc.) It handles the Throttle Quadrant Console, Cirrus II, Professional Flight Console, and the Jetliner, with options such as Pedals, Avionics Stack and the Remote Instrument Controller (RIC).
July 20th 2020.
PFCHIDincludes
PFCHID.DLL for FSX/P3D1-3, and
PFChid64.DLL for P3D4, P3D5 and MSFS (FS2020)
An add-on for FSUIPC3, FSUIPC4, FSUIPC5, FSUIPC6 or FSUIPC7 to drive PFC's modern USB HID devices.
July 20th 2020.
HidScannerA little program for scanning connected (or even just Registered) Joysticks and other HID (Human Interface) Devices and providing full details. It can stay running and monitor changes too, if needed.
64-bit Module User KitThe 64-bit Module User Kit only.
64-bit External User KitThe 64-bit External User Kit only.

FSUIPC and WideFS for FS2004

The version FSUIPC below is also compatible with the Microsoft Flight Simulator 9.1 UPDATE which was made available on October 9th 2004.

Note that FSUIPC3 and WideFS6 are no longer supported. But a free Registration is provided:
Name: free user
Email: [email protected]
FSUIPC3 KEY: Y8ZG SUWH TIQ2
WideFS6 KEY: IUT7 DBMK 1EU1

FSUIPC 3.999z9

FSUIPC.DLL (FSUIPC3) replaces FS6IPC.DLL for use with FS2004.
September 9th 2013.

WideFS6WideFS consists of WideServer 6.995, WideClient 7.156, and WideCloser 1.0.2.
WideFS Links FS utilities over a LAN, without needing to have a copy of FS on the second computer. Works with FS2004. FSUIPC is required. Includes TCP/IP and IPX/SPX support.
January 31st 2019.

Older Unsupported Utilities and Documents

FS2004controlsDocumentation about FS2004's keyboard and joystick control inputs.
October 1st 2003 (17 KB)
FSUIPCRun Options
for FSUIPC 2.94 or above

FSUIPC Run Options by Jos� Oliveira, this utility allows you to set the options for running programs via FSUIPC on the FS computer (please see the FSUIPC Advanced Users Guide).
July 24th 2003.

AIBridge(link)AIBridge by Jos� Oliveira, this priogram utilises the new feature in FSUIPC to inject Traffic information into the TCAS tables to add Multiplayer aircraft, so that these will show on TCAS radar displays and gauges.
EpicInfo 4.22EpicInfo is an incredibly useful module for anyone using an Epic together with FS. If you have an Epic just download it without any further ado.

This version is compatible with both USB and ISA versions of the EPIC.
December 9th 2003.

GFDisplay 1.30GoFlight display and indicator handler for registered FSUIPC users -
November 27th 2009.
GPSout 2.61

Provides GPS style output on a COM port, for connection to FliteMap, AutoRoute, or other atlases and moving map programs which accept standard NMEA 0183 format input.

Note: For FSX this facility is part of FSUIPC4 and needs user registration.
May 8th 2013.

AutoSave 1.501with FS2004 support. It will save flights ('STN' files) at regular intervals, so you can retry that crashed landing or quickly recover from other problems.
Note: For FSX this facility is part of FSUIPC4 and needs user registration.
December 24th 2004 (released Jan 2nd 2006).
Older non-English FSUIPC Documentation

French Docsby Fabrice Erdinger , Philippe Durand, and Sylvain Jub� (User Guide for Version 2.96)
French FSUIPC Run OptionsTranslated bySylvain Jub�
French SDK Docs by Arnaud Dupin de Beyissat (for Advanced Users and Programmers)

FSUIPC Module French Version 2.96by Sylvain Jub�

FS2002controlsDocumentation about FS2002's keyboard and joystick control inputs.
December 4th 2001
FStarRC 2.31

This package provides Jeppesen FliteStar/FliteMap (version 8 or 9) with a way to generate plans for FS2000/2002/FS2004, and .apl input files for direct use in JDTLLC's Radar Contact (all versions from 99 through 2.2 and including the current version 3).
May 8th 2013

FS2000ctlsDocumentation about FS2000's keyboard and joystick control inputs.
November 25th 1999
EpicLink 1.05EpicLink allows you to link multiple EPIC installations on a LAN, under Windows control and using the IPX/SPX protocol. Includes the latest Epic.Vxd July 2000. For ISA EPIC cards only
FS98ctlsDocumentation about FS98's keyboard and joystick control inputs.
June 2nd 1999

Already a Python user? You can install this version of Panda3D with pip!

Windows

Ubuntu

Source Code

Sample Programs

Freeware Aircraft For P3d V5

Download

Miscellaneous

Download

This is an update to 1.10.4, which had a regression when calling destroy() on DirectGUI items. The release notes for 1.10.4 follow. Click here to view the release announcement.

Free

1.10.4 fixes a regression with DirectScrolledList in 1.10.3, fixes various other bugs, and introduces a few minor features.

P3d 4.1 Download Windows 10

  • Fix exception trying to create DirectScrolledList
  • Fix flickering in DirectScrolledFrame and other scissor issues (#681)
  • Experimental support for Python 3.8
  • Support adding icons to deployed applications
  • Support non-affine (eg. projective) transforms in calc_tight_bounds
  • Allow setting notify-output after initial import
  • Fix macOS issue locating Panda3D using Python 2.7.13+ from python.org
  • Support for Maya 2019
  • On Windows, pip is now installed by the installer (#690)
  • Fix Actor.makeSubpart on models with pre-bound animations (#647)
  • Properly interrupt task manager if first task chain raises error (#692)
  • Fix return value of encrypt_string in Python 3 (#684)
  • Support writing loader plug-ins in Python
  • Fix reading multiple p3d_TextureMatrix[] values from GLSL shaders
  • Fix shader error flag not being set if GLSL compilation failed (#622)
  • Add NodePath.replace_texture() convenience method
  • Fix deadlock when building with SIMPLE_THREADS=1 (#704)
  • Fix DirectOptionMenu cancelFrame not working inside scrolled frame (#658)
  • Fix assertion when calling analyze() on geometry with strip cut index
  • Implement fallback in GL renderer when F_sluminance is not supported (#693)
  • Set reasonable limits for sliders in ParticlePanel
  • Fix for DirectEntry autoCapitalize feature on Python 3 (#628)
  • Fix various DirectGUI items not working before ShowBase is instantiated
  • Work around an MSVC compiler bug in the release build
  • PythonUtil.weightedChoice now raises IndexError on empty list
  • Support changing DirectScrollBar width after initialiation (#699)
  • Workaround for Bullet deadlock when adding shape to a scaled body (#689)
  • Support setting DirectEntryScroll entry after initialization (#702)
  • Fix some missing imports in directtools (#698)
  • Fix undefined behavior issue when using musl-libc
  • Update Eigen in Windows thirdparty packages to 3.3.7
  • Update metadata of pip wheels