Traktor Pro 2 Audio Setup

  • TRAKTOR’s intelligent features allow for easy remixing of tracks on the fly; and you can switch any deck to a Sample Deck and load up to four loops or one-shot samples each, or 16 in total. Its new Loop Recorder can record loops from mixer channels, master out or audio interface inputs, while you mix in more than 30 performance effects.
  • Step 3, variant 2: Set the Input Mode for Audio 4 DJ in 1.2.3. If you are using Traktor version 1.2.3 and higher you can change the Input Mode for Audio 4 DJ direct inside Traktor: Open the Preferences dialog. Select the category Timecode Setup at the left side of the window. Open the list Audio 4/8 Input mod and select the desired mode.
Sara Simms is here to take you beyond the techniques in her recent article on creating MIDI mappings in Traktor Pro. Learn how to create 2 advanced mappings in NIs Traktor Pro.

In one of my recent articles, I demonstrated how to create a simple MIDI mapping in Traktor Pro. If you're ready to advance your mapping skills, let's learn to create two advanced mappings in Traktor.


Load and Sync

The first mapping that we'll create allows you to load and sync a track at the same time, and trigger both functions from a single button. This is a highly useful mapping if you're a digital DJ, who frequently uses the Sync function in your sets.

Audio

Start by opening Traktor Pro, and connect your controller to the computer.

The TRAKTOR AUDIO 2 setup is a good option for gigs that are tight on space but require big sound. Laptop Another way to use TRAKTOR DJ 2 is on a laptop with monitors connected to the laptop. This is a good option for those who are comfortable DJing on a computer and would be an easy way to start mixing if you don’t own an iPad or hardware. Timecode Setup; Mic Setup; Kontrol X1 MK2 Tutorials. Review (Free) Preferences Setup; Traktor DJ Tutorials. Intro (Free) Dropbox Setup; iTunes / Metadata Sync; Audio 10 / Audio 6 Setup; Traktor Key. Traktor Key Setup; Mixed in Key. Miked In Key Setup; Pioneer Installation Guide. CDJ 2000/900 Setup Mac; Advance Mapping. Intro (Free) Controller. Slim enough to fit in your pocket, TRAKTOR AUDIO 2 is the ultra-portable DJ soundcard designed for TRAKTOR PRO 3 and TRAKTOR DJ 2. Pre-listen to your next track in premium 24-bit/48 kHz, club-ready audio – before the crowd hears it. With TRAKTOR LE 3 software included, TRAKTOR AUDIO 2 is the comprehensive DJ soundcard built for the road.

Then, go to Traktor > Preferences and navigate to the Controller Manager Section.

In the Device Setup section, you can either choose to modify the mapping for an existing device, or create a new MIDI mapping by clicking:

Add (located under the Device) then Generic MIDI.


For demonstration purposes, I'll modifying the mapping for my Traktor Kontrol X1. In the Assignment Table Section, scroll down to Load Selected (Deck Common ' Deck A) and click to highlight it. Alternatively, you could delete this original function in the Assignment Table, (by highlighting, and deleting it) and add a new one by clicking:

Add In, Deck Common, and scroll down to select Load Selected.


In the Device Mappings Section, click the Learn button (it will turn yellow when clicked), and press down on the button on your controller that you would like to map. I've chosen to map the left Load button to this function. Alternatively, you can also select the button by mouse clicking the box directly to the right of Learn.

After you are finished, click again on the yellow Learn button to deselect it.


In the Mapping Details section, select the following settings:

  • Type of Controller: Button
  • Interaction Mode: Trigger
  • Assignment: Deck A


(Note: You may use another Deck; however you will have to set the next mapping to same deck)


In the Assignment table, find the Sync On function and highlight it, or click Add In, Deck Common and scroll down and click on Sync On.


Traktor Pro 2 Audio Setup

In the Device Mappings Section, click the Learn button (it will turn yellow when clicked), and press down on the button on your controller that you would like to map. Choose the same button that you selected for the Load function. As you can see, I've mapped the same left Load button. Remember, you can also choose to select the button by mouse-clicking on the box to the right of Learn.

Traktor Pro 2 Audio Setup Download

In the Mapping Details section, select the following settings:

  • Type of Controller: Button
  • Interaction Mode: Hold
  • Assignment: Deck A

(Note: Make sure whichever Deck you choose is set to the same deck as the Load Selected function)


Lastly, in the Button Options section, click to the left of Invert to create a check mark in the box.

By clicking Invert, we have reversed when the Sync On feature is activated. Instead of Sync On being applied when the Load button is pressed down, Sync On is activated when the button is released.


Here's the way we have set up our mapping to work:

When we select a track and press down on the the Load button, the track is loaded up into Deck A. When we released the Load button, Sync On is activated. These two commands appear to happen simultaneously, and Sync On is never deactivated by loading tracks.

Test out your new mapping by clicking Close in the bottom of the Preferences window, and load up a track by clicking the Load button on your controller (or the button you have selected for the mapping). Your tracks should now Load and Sync at the same time!

To save your mapping, you can create a new .tsi file. Open the the Traktor Preferences, and click Export (in the lower left hand corner).

Make sure to leave following boxes are checked: Keyboard Mappings, Controller Mappings, and GUI Layout. You may wish to leave Effect Settings and Other Preferences and Settings Checked as well.


Save your .tsi file in a safe location, and close the Preferences window.


Single FX Mapping

Traktor Pro 2 Audio Setup

The second mapping that we're going to create allows you to control your dry/wet FX Adjust, and select your FX using the same endless encoder.

Start by navigating to your Traktor Preferences, by clicking Traktor, then Preferences.

In the Effects Section, under the FX Panel Mode, set FX 1 to Single.


Navigate to the Controller Manager section, and in the Device Setup, choose your device or create a new one by clicking Add, then Generic MIDI.

We're going to be creating a Modifier, which allows you to map two or more functions to the same button.

Underneath the Assignment Table, click Add In, Modifier, then select Modifier #1.


In the Device Mappings section, click the Learn button so it turns yellow, and then select a pushable encoder button to assign the modifier to. Press down on the button on your controller, or mouse click in the box to the right of the Learn button. I have chosen to use left Load button.

In the Mapping Details section, select the following settings:

  • Type of Controller: Button
  • Interaction Mode: Hold
  • Assignment: Global


In the Button Options section, set the value to 1.


By setting the value to 1, this basically means when you hold down the button, Modifier #1 is turned on. When you are not pressing the button, the value returns to 0.

In the Assignment table, click Add In, F/X Unit and scroll down to select Dry/Wet Adjust.

In the Device Mapping section, click Learn and turn an endless encoder on your controller (or mouse click to select one). When you are finished, click the Learn button again to deselect it.

In the Mapping Details section, we now have to apply the Modifier.

In the Modifier Conditions, set the Modifier to M1, and the Value to 0.

In the Mapping Details section, select the following settings:

  • Type of Controller: Encoder
  • Interaction Mode: Relative
  • Assignment: FX Unit 1


In the Assignment table, click Add In, F/X Unit and scroll down to select Effect One Selector.

In the Device Mapping section, click Learn and turn the same endless encoder on your controller that you assigned to the Dry/Wet Adjust (or, mouse click to select one). When you are finished, click the Learn button again to deselect it.

In the Mapping Details section, under the Modifier Conditions, set your commands as follows:

  • Modifier: M1
  • Value: 1
  • Type of Controller: Encoder
  • Interaction Mode: Relative
  • Assignment: FX Unit 1


Close the Preferences, and check to see if your new mapping works by turning the encoder you assigned. If you have successfully created your mapping correctly, you should be able to scroll through your D/W adjust when you turn the encoder, and scroll through your Traktor effects when you press and turn the encoder.

Export your mapping, by opening up the Preferences, clicking Export, and saving your .tsi file.

Congratulations on learning two new mappings! I hope you enjoy using them when you DJ.

Pro

Traktor Pro 3


Related Videos

Traktor Pro 2 v2.6.4 Full Patch adalah salah satu software yang dapat anda gunakan untuk menggabungkan beberapa file audio dan dapat anda edit sehingga menghasilkan suatu musik yang baru karya anda sendiri. Software ini dapat anda gunakan untuk membuat musik – musik DJ. Jika anda ingin berlatih untuk menjadi seorang DJ, Traktor Pro adalah software yang sangat tepat untuk anda. Oleh karena itu software ini sering disebut juga sebagai DJ Software, karena dapat meremix musik menjadi suatu karya seni musik yang baru yang orisinil.

Traktor Pro 2 v2.6.4 Full Patch ini dilengkapi dengan berbagai fitur professional yang sangat lengkap. Diantaranya adalah terdapat 4 Deck dalam aplikasi ini yang tentunya akan membuat musik hasil remix anda menjadi semakin sempurna.
Segera download Dj Software Traktor Pro 2 v2.6.4 Full Patch ini secara gratis di GigaPurbalingga. Fitur Utama Traktor Pro :

  • Get an understanding of the Remix Deck
  • Remix Deck detail
  • Compatible with all Windows
  • Preparation Set Remix
  • Offering Remix Set

Cara Instalasi :

  1. Disconnection of internet connection to make sure the system is not connected to the Internet by the end of the process.
  2. Run the file to install the software Traktor.Pro.2.v2.6.4.exe pay.
  3. Do not run after the software installation process and click Restart System.
  4. After starting up the software to run the system without being logged in. Patch Folder and File Copy Patch.exe to the install location.
  5. After you copy the Patch.exe file to run it. (In Windows Vista and 7, first right-click on the file Patch.exe then choose Run as administrator option)
  6. In the window that appears, click on the Patch button and wait for the process to finish the registration and then close the window.
  7. The software was successfully registered. Also note that after the update it will never crack the software.

Link Download

Traktor Pro 3 Free Download

4Server_Direct Link

Traktor Pro 2 v2.6.4 (150 Mb)

Traktor Pro 2 Audio Setup Software